top of page

Remote learning support

Public·4 members
Joshua Turner
Joshua Turner

Setup My Passport Ultra For Mac

How to use my passport for mac? This is a question often asked by Mac users only. Windows users don't need to do much other than plug in the WD Passport to use it, but for Mac, it's not as straightforward as that.

Setup My Passport Ultra For Mac

You cannot access your external hard drive, or your WD passport ultra hard drive is not showing up on your Mac device. Either of these can be very annoying, especially when you need to transfer something right then.

The thought that your data has gone forever or you can never transfer your data to another device can concern you a lot. Follow this guide, and you'll learn the causes and fixes to WD my passport not showing on Mac.

One of the leading causes that your Mac might not be showing your WD passport can be that your Mac is not formatted to display external devices on the desktop. Your Mac can be recognizing your WD passport, but it is not set to show to the icon on the screen.

Sometimes the disk utility doesn't recognize your file, which is why it doesn't show in the disk utility at all, but usually, the WD passports are present in the disk utility, but they're greyed out and not mounting. In this case, you can follow these steps to mount your external hard drive manually.

Don't worry if your Mac doesn't recognize your WD passport, try identifying the issue first and then the solutions accordingly. The good thing is that you can always recover your WD passport unless it is physically damaged.

If a message like: "You must run the WD Drive Unlock application from the WD Drive Unlock CD associated with the drive, you want to unlock" pops up and you can't open or unlock your WD passport drive:

5. Use the Disk Utility to check the setup from your hard drive. Check if it's identified as USB External Physical Disk and GUID Partition Map. Then check if the WD passport drive is formatted to APFS (APFS partitions can't be recognized on macOS 10.12 or earlier versions), EXT4, or NTFS. Sometimes, the incompatible file system of the drive makes this WD My Passport not detected.

Note: Apple Diagnostics is a set of diagnostic tools used by technicians to find Mac hardware faults. Before starting Apple Diagnostics, it is advised to disconnect all the external devices except the keyboard, mouse, and your WD passport drive.

If you look at the format of the external hard drive, it is probable setup to NTFS and is something that Macs can read and copy from but cannot write to it. The only way you can do that is to reformat the drive to either so that it will be for Macs to write to or you can format it to FAT and it can read and write to both. Check out the articles below for more information. Also check out the other discussion that I provided as another user found a 3rd party piece of software that may assist you further if you do not want to reformat the drive.

Thank you very much, obviously it is what I feared , a forced reformat of the passport drive to FAT 32. Unfortuantely I cant do that at the moment because I would have to buy another 1TB drive just to back the files up, and do not have money to spend like that for another 2 or 3 months. However, I have found a way to work around this is to install a micrisoft windows operating system on the make via a virtual machine, where your mac and the virtual machine are like intergrated, so that the desktop on the Mac is shared to the desktop on the virtual PC inside the mac. Then move the NTFS drive to be connected to the virtual pc , and then drag and drop the files or copy and pase them from the mac onto the drive that is connected to the virtual pc, which is connected physically to on your Mac's USB.

As you can see, this column has both internal and external drives listed there. Be extremely careful, do not tamper with the internal drives. Go over the list very carefully and select your external drive. It should be fairly obvious which one it is. In your case it should be labeled as something similar to WD passport ultra. If not, you can look at the storage capacity and check if it matches with your disk's (here, 4TB).

Unfortunately, many people have been facing the "WD passport not showing up" issue. There are some major causes of this issue that should be taken care of to prevent this scare.Many people store their important information in an external hard drive as no one can access them. The information can be about their business or personal life. You'd be pretty gutted when your Windows 10 refuses to accept WD my passport.It is indeed the point of concern and can make anybody extremely disappointed. You can surely take many steps to solve this issue, but every step you take may turn out to be missed or hit for you.Luckily, you can get rid of this unwanted situation after reading this guide as we'll explore appropriate solutions to your issue.

If you haven't found the method useful, there might be some issues with your disk's file system. Sometimes, WD my passport hard drive, gets damaged, which might end up causing the issue you're currently having.

USB controller plays a pretty important role in connecting your system with USB drives. However, if you find that the USB controller isn't properly installed, you'll need to remove and reinstall it again. Doing so at times can help you eliminate the "WD passport not recognized'' problem.

Luckily, you can recover data from your unrecognized WD passport by hiring the mind-blowing services of Tenorshare 4DDiG. It is a pretty professional third-party tool that allows you to put things in order with minimal effort.

First of all, you'll need to download and install the 4DDiG data recovery tool on your Windows 10. Later, you'll need to connect the wd passport hard drive to your computer. Next, you'll need to hit the external hard disk and click Scan to proceed ahead.

This guide should help you fix the "WD passport not showing up" issue as we've reviewed the reliable solutions here.However, if you still can't see a WD passport on your PC, you can acquire the services of Tenorshare 4DDiG, as it allows you to recover data from an unrecognized WD passport.We highly recommend 4DDiG software as it has more options than other data recovery tools.

"@context":" ","@type":"HowTo","name":"","description":"Updating the drive firmware has proved to work for many users in fixing the WD MY Passport not working or unavailable issue. So be sure to try it like in the example below.\u00a0","totalTime":"PTM","tool":["@type":"HowToTool","name":"Windows 10"],"step":["@type":"HowToStep","url":" -passport-ultra-not-detected/#rm-how-to-block_6390acd8c81d6-","itemListElement":"@type":"HowToDirection","text":"1. Visit the\u00a0Western Digital website\u00a0to download the firmware update file.","image":"@type":"ImageObject","url":" -content/uploads/2022/10/download-now-wd-my-passport-not-showing-up-windows-10.png","width":1068,"height":554,"@type":"HowToStep","url":" -passport-ultra-not-detected/#rm-how-to-block_6390acd8c81d6-","itemListElement":"@type":"HowToDirection","text":"2. Right-click the downloaded file and select\u00a0Extract file\u2026","image":"@type":"ImageObject","url":" -content/uploads/2022/10/extract-files-wd-my-passport-not-showing-up-windows-10.png","width":888,"height":525,"@type":"HowToStep","url":" -passport-ultra-not-detected/#rm-how-to-block_6390acd8c81d6-","itemListElement":"@type":"HowToDirection","text":"3. Connect the WD Passport to your PC (USB 2.0 port) with the cable that came with it, open the extracted folder, and double-click the\u00a0WDFirmwareUpdater.exe\u00a0file.","image":"@type":"ImageObject","url":" -content/uploads/2022/10/wd-updater-wd-my-passport-not-showing-up-windows-10.png","width":888,"height":525,"@type":"HowToStep","url":" -passport-ultra-not-detected/#rm-how-to-block_6390acd8c81d6-","itemListElement":"@type":"HowToDirection","text":"4, Now, follow the simple on screen instruction to complete the installation. ","@type":"HowToStep","url":" -passport-ultra-not-detected/#rm-how-to-block_6390acd8c81d6-","itemListElement":"@type":"HowToDirection","text":"5. Once the installation is complete, your PC should show that a drive is connected to your PC and what you need to do to make it work."]


Welcome to the group! You can connect with other members, ge...


bottom of page